Organizer Box Designer

Pro

Design stackable boxes with an angled front opening. The front panel is lower than the back panel, with a diagonal slope along the side walls. Perfect for storage and sorting systems with quick access to the contents.

↓ Jump to download

Parameters

Adjust the box parameters

Joint Type

Classic finger joints on all edges

Box Dimensions

Dimensioning

Dimensions incl. material thickness and stacking features

Width (long side)(mm)

Height (back wall)(mm)

Total height of the back wall (outer dimension)

Depth (short side)(mm)

Total depth incl. beak: 170.2mm (+20.2mm)

Front Opening

Front Height(%)

50 %

Front wall height: 60mm (50% of back wall)

Tilt Angle(°)

20 °

Front panel tilted 20° (0° = vertical)

Material

Material Thickness(mm)

Thickness of the material (e.g. plywood, MDF)

Gap between Parts(mm)

Cut Width (Kerf)(mm)

Laser cut compensation (0 = none)

Finger Joints

Finger Width(mm)

Target width for each finger

Min. Finger Count

Handle Cutouts

Enable handle cutouts

Hexagonal handle cutouts on back and side walls

Handle Width(mm)

Handle Height(mm)

Corner Radius(mm)

Distance from Top Edge(mm)

Distance of the handle cutout top edge from the upper edge

Layout

Space-saving Layout

Compact arrangement instead of cross layout

Adjust parameters to generate a box

Angled Front Opening

The front panel is lower than the back panel. A diagonal slope along the side walls provides easy access to the contents.

Stacking Mechanism

Stacking tabs on the back and side panels lock into the cutouts of the box below. Secure stacking despite the open front.

Configurable Opening

Front height and slope position are fully adjustable. From a shallow parts bin to an almost closed box — anything is possible.

Tips for Organizer Boxes

Front height: 50% of the back panel height is a good starting point. For flat parts (screws, components), 30% is often enough.
Slope position: At 35%, the slope starts in the front third of the side wall. Higher values produce a steeper, shorter slope.
Stacking: The open front does not compromise stacking stability, since the back and side panels still have stacking tabs.
Material: 4–6 mm plywood is ideal. The slope places no special demands on material thickness.

Example Applications

Workshop Sorting System

Stackable boxes for screws, nuts, and small parts — the contents are instantly visible and within reach.

Shelf Organizer

Open boxes on the shelf for tools, craft supplies, or office materials. Labels can be added along the slope.

Market Stall Display

Stacked display boxes where the goods stay visible and easy to reach through the open front.

Kids' Room Storage

Stackable toy boxes with a low front edge — children can easily reach the contents and tidy up on their own.